Subaru Outback Overheating Error Code
What the Overheating code means
Blown head gaskets are the notorious legacy problem of the Subaru EJ25 engine in older Outbacks: the gasket fails and lets coolant leak externally or into the cylinders, causing coolant loss, overheating and eventually severe engine damage. On an older Outback that overheats and loses coolant, the head gasket is the prime suspect rather than an outside possibility.
Likely causes
- Head gasket failure on the EJ25 engine
- Low coolant from radiator, hose or water pump leaks
- Stuck thermostat or failed fans
- A previously overheated engine warping the head and killing the new gasket if not machined
How to fix it — step by step
- Stop driving if the gauge climbs; Subaru heads warp readily when overheated
- Check coolant level cold and look for external leaks, milky oil, or bubbles in the reservoir while running
- Have a shop do a pressure test and a block test for exhaust gases in the coolant to confirm the gasket
- A confirmed head gasket is major work; both heads should be checked and machined as needed, and the timing belt service usually makes sense at the same time
Parts that commonly fix the Overheating code
- head gaskets - Shop at Amazon
- timing belt kit - Shop at Amazon
- water pump - Shop at Amazon
- thermostat - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.