Samsung Dryer HC Error Code

What the HC code means

Heating error: the dryer is getting too hot. Samsung says the most common cause is a clogged lint screen or vent system trapping heat.

Likely causes

  1. Clogged lint screen trapping heat
  2. Restricted exhaust vent system
  3. Low voltage supply on electric models
  4. Faulty heating element, thermostat or thermistor

How to fix it — step by step

  1. Clean the lint screen thoroughly
  2. Clear lint from the vent hose, wall duct and outside vent hood
  3. Check the breaker panel - on electric dryers one half of the double breaker can trip; switch it fully off then on
  4. Unplug for 2-3 minutes, restore power and restart; if the code returns with a clean vent, request service

Parts that commonly fix the HC code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung dryer error codes

See all Samsung dryer codes & guides →