Pentair Pool pump Priming Failure
What this problem usually means
On Pentair IntelliFlo3 VSF / IntelliPro3 VSF variable-speed pool pumps, Priming Failure is an alarm that stops the pump; the guide says priming failure can be caused by lack of water in the volute strainer basket.
Likely causes
- lack of water in the strainer basket/volute
- low pool water level
- air leak on the suction side or lid O-ring
- clogged strainer basket
How to fix it — step by step
- Turn power off at the breaker before opening the strainer lid
- Check pool water level is at mid-skimmer and top it up if low
- Empty the strainer basket, fill the pot with water, and check the lid O-ring is clean and seated
- Restore power and let the pump run its priming cycle
- If priming fails repeatedly, call a pool/spa technician to check for suction leaks
Parts that commonly fix it
- strainer basket - Shop at RepairClinic
- lid o-ring - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.