LG Dryer d80 Error Code

What the d80 code means

Flow Sense warning: the dryer's exhaust duct is clogged or restricted by about 80%. On gas dryers, d80 can also indicate a lack of gas supplied to the unit.

Likely causes

  1. Lint buildup restricting the exhaust duct
  2. Crushed or kinked duct behind the dryer
  3. Blocked exterior vent hood
  4. On gas models, gas supply turned off or not reaching the dryer

How to fix it — step by step

  1. Clean the lint filter
  2. Inspect the whole exhaust duct for crushing, kinks or damage and clear lint buildup at the rear exhaust
  3. Check outside while the dryer runs to confirm air is blowing out of the vent
  4. On a gas dryer, confirm the gas supply valve is on
  5. Arrange professional vent cleaning if the run is long or the code returns

Parts that commonly fix the d80 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related LG dryer error codes

See all LG dryer codes & guides →