Electrolux Dishwasher Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 11 codes covered.
Shop Electrolux Dishwasher parts at RepairClinic
- Er-01 — Water leak detected: the leak detector has found water under the tub, and the control shuts the dishwasher down.
- Er-02 — Thermistor / turbidity sensor failure: the control cannot read water temperature or soil level correctly.
- Er-03 — Wash motor failure: the circulation (wash) motor is not running correctly, so dishes will not get clean.
- Er-04 — Upper fan / vent failure: the upper drying fan or vent is not working (grouped with Er-05 on many models).
- Er-06 — Lower fan failure: during the dry cycle the control board does not receive proper speed feedback from the lower fan.
- Er-07 — Drain valve failure: in drain mode the control board does not receive proper position feedback from the drain valve (also shown as Er-11 on…
- Er-08 — User interface control failure: the control board has verified a tactile or touch switch on the user interface is bad or shorted.
- Er-09 — Communication failure between the main user board (user interface) and the power supply / electronic control board.
- Er-10 — Electronic control board relay failure: a relay on the main control board has failed.
- Er-12 — Drain valve position error: the drain valve is not reaching or reporting the position the control expects.
- Er-13 — Electronic control board failure: the main control has failed and the dishwasher shuts down.