Chevrolet Silverado 1500 Hard brake pedal

What this problem usually means

On 2014-2018 Silverados, a brake pedal that gets hard to push with longer stopping distances points to the engine-driven vacuum pump that powers the brake booster wearing out; about 770 NHTSA complaints describe it. GM covered it two ways: recalls (19V645000, and 20V603000 for some 2018 trucks) updating brake software to add hydraulic assist, and special coverage N182202780 paying for a new pump for 10 years/150,000 miles.

Likely causes

  1. Worn engine-driven vacuum pump reducing brake booster assist
  2. Vacuum pump drive belt failure
  3. Vacuum hose leak between the pump and booster
  4. Brake booster failure (less common than the pump on these trucks)

How to fix it — step by step

  1. Stop driving the truck if the pedal is hard and stopping distances have grown; reduced brake assist is a safety problem, not an annoyance
  2. Check your VIN at nhtsa.gov/recalls for the vacuum pump recalls and ask a dealer whether special coverage N182202780 still applies, since the pump replacement may be free
  3. Have the vacuum pump output and the pump belt inspected; a failed belt can mimic a failed pump
  4. Pump replacement and the recall software update are dealer/shop work on a safety system

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Chevrolet Silverado 1500 problems

See all Chevrolet Silverado 1500 codes & guides →